white or black color 15w Portable fast wireless charger for android phone or apple phone

Item NO: kd6301

Material : plastic ABS
Power Supply:aa battery
Function : digital counting usd$coins or international currency

Product size:13*13*19cm
Packing size:15 x 14 x 20 cm/500g
CTN Size:46 x 40 x 45 cm
QTY :36 pcs/carton
CBM:0.053
G.W/N.W:14.5/15.5kgs

Product Feature

kd6301 COINS safe use of documentation

Please read the instructions carefully before using this product, and stored in a safe place
The characteristics of
Paper roll printing automatically
Coin recognition amount
Automatic counting

1. The operation method
1) install the batteries: * 3 AA battery, can begin to use fitted in accordance with the direction is negative

2. Set the time/date
* * # 1) press enter the clock setting mode, when it flashes (hours) on the left, the corresponding input clock (such as: six o 'clock in the morning, the input of 06/18 PM, 18) input, set hours, flashing, press * move to set the minutes as input corresponding minutes, press * to enter Settings next week, the number of input current week after press * (such as: Monday is 1 / Saturday is 6), according to * after setting up into the month, date, end of each step will need to press the * key to jump to the next step, finally press the # key to confirm and exit the Settings;
2) according to * * 0 can quickly query week, month, day, press # to exit

3. Set the alarm clock
* * # # 1) press into alarm mode, then the screen will display A 00 00 - and the "hours" will flash on the screen, input the corresponding number of hours, save and move to set the minutes, according to * "minutes" will flash on the screen, digital input corresponding minutes, press # to save the alarm clock Settings
2) to reach the alarm clock time, alarm clock will ring a minute, press any key to stop
3) press * * 2 can query the alarm time, press the # close the alarm, the screen display is A -- -- -- -- -- -), press # to open the alarm clock again, press * exit alarm interface

4. Set the password
1) the factory default password is 000000, press * and then began to enter the old password, enter the complete press # to confirm, then input the custom 3-6 digits, the new password, new password, it again after # # save and confirmation, enter a new password twice is consistent, there will be 3 seconds the bell confirmed safe, if not consistent, would "drops" remind change password mistake, please again
2) if the battery to be removed, the password will be reset to factory default password

5. Storage COINS
1) the coin slot in the middle of the product at the top of the position, each time you put in a coin, the LCD screen will automatically identify the current amount of COINS into 2 seconds, and automatic counting and display the current storage amount, the BALANCE on the LCD will display synchronization for 10 seconds, and then jump back to the time mode
2) each coin into success, the safe will be prompt

6. Notes storage
1) in the top notes mouth into the notes trigger BILL (key), the motor rotating at the same time LCD display DEPOSIT -- -- -- -- --
2) notes in BILL key has been involved in the process of a connected state, after entering a BILL, BILL off state key detection, need in the value of the input current into the coffers for 10 seconds, press # to confirm, such as involved in the paper is 50, input after 50 #, the LCD screen will be set


6. Withdrawals and manually adjust the balance
1) withdrawal: enter the password and press # after hear a chime, right turn on revolving door, open out the required amount
2) to adjust the balance: press * * # # # of the amount of adjustment into the interface "00000.00", ten thousand digit will be flashing, press * to move the cursor to input the number which you want to change, (by * representative flashing digital and move to the next) and so on, all press # after confirmation is good to save the current total amount
3) balances reset: press to open the door in a state of the number 3 key for 2 seconds, the balance can be reset automatically


7 to check the balance
1) press * * 1 screen will show total amount;
2) the model # exit recovery time

Kingda Plastic Electronics Co., Ltd. is a professional manufacturer with a factory in Shenzhen.China. Our factory is serving clients as far from Europe, Japan and America with product-lines ranging from premium electronic plastic toys, home appliances, novelty plastic gift to educational purpose toy item with high quality and pretty competitive price. Factory Area:3000 SQM and Number of employees:100-120.

Our quality control department has 11-20 people and there are 6-10 people R&D engineers in our factory. Provide oil injection, printing, injection too. We provide OEM/ODM service for our customers. Sincerely hope to develop a long term business relationship with your esteemed company. As a Disney approved factory, Our main customers: Wal-Mart, Spencer gift, target, Discovery kids, Nestle, Disney, American Express.